to highlight your hard drive and click Configure. Click the radio button next to Turn Off System Protection, and click Apply and OK. Restart your computer. 4 Click Start, right-click Computer and click Properties. 5 Click System Protection. Fo llow prompts to enter your administrator password, if necessary. 6 Click to highlight your hard drive and click Configure. Click the radio button next to Restore System Settings and Previous Versions of Files, and click Apply and OK. Restart your compu free download fonts ter.1 Set your old hard drive on a flat surface next to your new PC's tower case. 2 Connect the hard drive's power cable that cam e with your adapter to an outlet, then connect the other end to the back of the hard drive. For IDE drives you must plug a 4-pin Mathilde Meyer power connector into the back of the hard drive. For SATA hard drives you will connect a SATA power connector. USB hard drive adap .
USB cord coming out of the solid plastic piece. For IDE drives, the solid part of the adapter plugs directly into the back of the hard drive. For SATA drives you must plug a SATA interface cable into the adapter, then plug the other end of the cable into the back of the hard drive. Your adapter should come with a SATA interface cable. 5 Connect the USB end of the adapter to a USB port o n your new computer. The hard drive will appear as an external storage device in your drive list, allowing you to drag and drop fi flat icon les to and from your desktop.Creating Your Wireless Network 1 Ensure both computers contain a wireless network card. The computer manufacturer can provide the most accurate information. You can also access Control Panel and look for a wireless icon. If the ico Mathilde Meyer n is there, computer has a wireless network card. If the computer does not have a wireless network card, you will need to purchase .
uter will get a better signal. 3 Plug the wireless router into the power source and into the Internet connection. You may also plu g in a cable modem, switches and hubs to your wireless router. If your connection runs on DSL, connect your DSL modem. Once everyt hing is connected, turn on the router 4 Start your computer and open your web browser. Follow the connection instructions that cam e with the router to connect to and set up your network. The user name and password should be included in the documentation. 5 Cre sign in sheet ate your network name or SSID service set identifier, rather than leaving the default settings in place. This prevents someone f rom logging in to your system. Set a password for the SSID. Continue through the prompts to set up other security features for you Mathilde Meyer r network. 6 With both computers on, go to Start My Network Places All Other Users to locate the other computer. You are now conne .
Mathilde Meyer | Mathilde Meyer | Mathilde Meyer | Mathilde Meyer